- Only four sensor SKUs required to replace over 290 OE sensors
- Meets market demand for easier application, reduced inventory
- Service coverage exceeds 150 million VIO from 2002 to 2021
Allentown, PA November 22, 2021 – Continental, a leading innovator and supplier of OE and aftermarket Tire Pressure Monitoring Systems and replacement parts, has taken multi-application TPMS sensor technology to the next level with its next generation of REDI-Sensor™ Multi-Application TPMS Sensors. These new, highly advanced and OE validated TPMS sensors were specifically developed in response to a growing demand in the aftermarket to make TPMS service simpler, faster, and easier, while minimizing application hassles and reducing inventory headaches.
The new REDI-Sensor line gives every shop a significant TPMS service advantage by dramatically reducing the different types of sensor SKUs needed to service incoming domestic, European and Asian vehicles. Shops will now only need to keep four REDI-Sensor SKUs on hand to replace over 290 different OE sensors on over 150 million VIO from model years 2002 to 2021.
Lindsay Smith, REDI-Sensor Program Product Manager, made the announcement, noting, “Service techs at both independent repairs shops and tire dealers are very frustrated by the state of TPMS replacement parts. TPMS service is a complex task and only gets more burdensome when you have to work with sensors that require extra steps for programing or cloning prior to installation, and you have to inventory a wide variety of sensors just to be able to service some of the vehicles that come in the shop. Our next generation REDI-Sensor sensors are the TPMS solution that today’s shops need. They’re lean on inventory and come ready to use right out of the box.”
Most versatile TPMS Sensor on the market
REDI-Sensor Multi-Application TPMS Sensors come ready to install, right out of the box and require no added sensor programming or cloning. They are pre-programmed from the factory and designed to follow existing OE vehicle relearn procedures. Plus, they work with most major TPMS scan tools and are readily compatible with advanced TPMS features such as autolearning, pressure by position, and tire fill alert systems.
The new REDI-Sensor sensors are offered in both clamp-on and snap-in valve configurations and 315 MHz and 433 MHz frequencies. They are made in ISO-certified facilities to the same quality standards as the OE parts that Continental supplies to automakers worldwide.